Shipping from China to Bavet
China → Bavet · via PNH air · clearance by General Department of Customs and Excise (GDCE)
Bavet is border SEZ on the Vietnamese crossing, and it is served through PNH air. That combination is what actually sets your delivery date on this lane — allow +1 day for the inland leg on top of clearance.
Clearance itself is handled by General Department of Customs and Excise (GDCE), and typical dwell at the gateway runs 3–7 days.
What the routing looks like in practice
Sihanoukville takes direct South China calls, while Phnom Penh is reachable by river barge from Cai Mep in Vietnam — often the cheaper option for LCL. Land trucking through the Bavet crossing from Ho Chi Minh City is a practical third route for urgent cargo that does not justify air.
| Air gateways used | PNH (Phnom Penh), REP (Siem Reap) |
|---|---|
| Air transit, China to gateway | 3–5 business days |
| Sea gateways used | Sihanoukville Autonomous Port, Phnom Penh Autonomous Port (river) |
| Sea transit, China to gateway | 6–10 calendar days |
| Gateway serving Bavet | PNH air |
| Inland leg to Bavet | +1 day from the gateway |
| Typical clearance / dwell | 3–7 days |
| Peak season to plan around | Sep–Nov |
What you will pay on arrival in Cambodia
General Department of Customs and Excise (GDCE) assesses duty and tax on cargo arriving for Bavet consignees. Current regime: VAT 10%; duty 7–35%, with ACFTA and RCEP preference on a Form E, with a de-minimis position of No practical de-minimis for commercial cargo.
Conformity is the part most first-time importers underestimate: CamControl inspection for regulated goods; Form E for duty preference. Getting this wrong is expensive because it usually cannot be fixed after the cargo has landed.
Restrictions and known friction points for Cambodia: Garment and footwear inputs move under specific duty-exemption schemes tied to the factory license, so the consignee's status changes the landed cost materially. Used goods and secondhand electronics face restrictions.
Air, sea or overland into Bavet?
| Mode | Transit to gateway | Best suited to |
|---|---|---|
| ✈️ Air Freight | 3–5 business days | time-critical, high-value and low-volume cargo |
| 🚢 Sea Freight | 6–10 calendar days | volume cargo where cost per kilo matters more than speed |
Transit shown is China departure to the Cambodia gateway and excludes the +1 day inland leg to Bavet and 3–7 days of clearance.
Before you book: Bavet checklist
- Photograph carton markings and seal numbers before departure — it makes any claim far easier to settle.
- Put the Bavet delivery address, contact name and phone number on the invoice, not just the packing list.
- Get the conformity paperwork moving early: CamControl inspection for regulated goods; Form E for duty preference.
- Declare lithium batteries, magnets, liquids and powders up front — retro-declaring after booking usually means re-planning the whole shipment.
- Compare gross weight against volumetric weight (L×W×H ÷ 6000) — the higher figure is what gets billed on air and express.
- Plan around the China-side windows too: Chinese New Year and Golden Week both compress capacity on the Cambodia lane.
Mode guides for Bavet
Frequently asked questions
How long does shipping from China to Bavet take?
China to the Cambodia gateway is 3–5 business days by air, 6–10 calendar days by sea. On top of that, allow 3–7 days of clearance with General Department of Customs and Excise (GDCE) and a +1 day inland leg to Bavet.
What duty and tax will I pay importing into Bavet?
General Department of Customs and Excise (GDCE) applies: VAT 10%; duty 7–35%, with ACFTA and RCEP preference on a Form E. The de-minimis position is No practical de-minimis for commercial cargo. Under a DDP arrangement these are pre-paid, so nothing is collected on arrival in Bavet.
Can you deliver door-to-door in Bavet?
Yes. Delivery to a Bavet address is quoted as one figure covering freight, duty and tax owed to General Department of Customs and Excise (GDCE), and the +1 day inland leg. Confirm whether your consignee wants the goods at a warehouse, a marketplace fulfillment center or a shop front, because the last-mile requirement differs.
How is the chargeable weight calculated for Bavet?
We compare actual gross weight against volumetric weight — length × width × height in centimeters divided by 6000 for air — and bill the greater of the two, rounded up to the next kilogram. Light, bulky cargo is almost always billed on volume.
When is the busiest time on the China–Cambodia lane?
Space and rates tighten around Sep–Nov, plus the China-side windows of Chinese New Year in January or February and Golden Week in early October. Book one to two weeks earlier in those periods.
What documents does General Department of Customs and Excise (GDCE) require?
A commercial invoice with HS codes, a packing list, the bill of lading or air waybill, a certificate of origin where it lowers duty, and any product certification (CamControl inspection for regulated goods; Form E for duty preference). We prepare and file these as part of the service.
Other delivery cities in Cambodia
References & official sources
Duty rates, thresholds and conformity requirements for Cambodia change by ministerial decision, sometimes mid-year. The figures on this page are buyer-planning references, not a customs ruling — confirm the current position for your own HS code with General Department of Customs and Excise (GDCE) or your broker before you ship.
- General Department of Customs and Excise
- WTO — Tariff Profiles (applied MFN duty by country)
- IATA — Lithium battery shipping guidance (PI 965–970)
- World Bank — Logistics Performance Index
- ICC — Incoterms 2020 rules (DDP, DAP, FOB definitions)
- IPPC — ISPM 15 wood packaging standard
Page data last reviewed: November 2026.
Shipping by industry
This page covers the route and clearance picture for the destination. Packing, classification and the compliance step that actually holds a shipment depend on what you are sending — these guides cover that by commodity.
- Home Storage Products Furniture & Home Products
- Fashion Textiles, Apparel, Footwear & Leather
- Laboratory Equipment Medical, Laboratory & Precision Instruments
- Locks & Safes Fire, Safety & Traffic Products
- Salon Furniture Beauty, Personal Care & Wellness
- Pet Products Consumer Goods & Gifts
- Umbrellas Consumer Goods & Gifts
- Private Label Products E-commerce & Retail Channels
- Bolts Metal Products & Industrial Components
- CNC Machines General Machinery & Industrial Equipment
- Industrial Furnaces General Machinery & Industrial Equipment
- Solar Inverter New Energy, Power & Electrical
Checking the Cambodia duty position yourself
Duty and tax figures on this page are planning estimates. The binding assessment is made by General Department of Customs and Excise (GDCE) against your declared HS code at the time of entry; where the amount is material, verify the current rate through ITC Market Access Map before committing to an order.
Classification drives everything downstream: the same carton can attract very different duty depending on the heading it lands in, and the structure those headings come from is the World Customs Organization Harmonized System. If your product sits near a boundary between two headings, resolve it before shipping rather than at the border.
For ocean cargo, restricted commodities move under the IMO's IMDG Code, and the container has to be declared and stowed accordingly. Batteries, flammables and corrosives all have a compliant ocean path; what causes rolled bookings is finding out about them after the container is packed.
If this is your first shipment into Cambodia, the Cambodia Country Commercial Guide covers the practical import environment in more depth than a rate page reasonably can, and it is written by a party with no stake in your booking.
Watch: the process behind this route
This guide covers routing and clearance for Bavet. The video below covers the wider shipping process that sits around it.
Bill of Lading Explained (BOL) | Types, Components & Full Beginner Guide | Shipping Document — 10 Min For Supply Chain. Published on YouTube by a third party; we link it because it explains the process well, not because we produced it or endorse the provider.